top of page
Instrumentenaufbau_V2.png
Grands gold.png
Aufbau Flügel
  • 1) Frenator soft-close system
    Allows smooth automatic closing of the fallboard and therefore avoids damages or injuries by a fallboard dropping shut.
  • 2) Key-bed
    Made of massive spruce. Its three-layer construction provides long-lasting stability and thus a permanently precise functioning of the action.
  • 3) Tuning block
    Made of cross-glued, multi-layer beech wood. Provides high stability and strong support for the string tension, which leads to an especially good stability of the tuning.
  • 4) Action
    Made from around 6.000 wooden, metal, leather and felt parts. Designed state-of-the-art for professional exigencies.
  • 5) Soundboard support
    Made with glued-in ribs. Thanks to its design with a curve, a connection is created that offers the soundboard best resonance conditions.
  • 6) Membrator groove
    Optimises the acoustic properties of the soundboard and thus the transparent sound that is characteristic for Seiler.
  • 7) Soundboard
    Made from mountain spruce with especially fine grain. It is glued to the rim in a slight curve to obtain some tension and amplifies the vibrations of the strings.
  • 8) Ribs
    Made of spruce with standing growth rings. Each of these ribs has a specific form, which adds to the membrane effect of the soundboard.
  • 9) Back posts
    Made of massive spruce, wedge-glued. Strut the framework, the so-called rim, which serves as a stable support for the soundboard.
  • 10) Bridge
    Made from beech with a top layer of maple. Provides a tight fit of the bridge pins and a precise transmission of the strings’ vibrations to the soundboard.
  • 11) Outer rim
    Made of 2,4 mm mahogany veneer stripes. Does not only provide the instrument’s nice outward appearance, but also influences its sound.
  • 12) Tone Volume Stabiliser
    Creates a permanent longitudinal curve. Improves richness and projection of our sound, optimises and preserves the elasticity of the soundboard.
  • 13) Cast-iron frame
    Made of high-grade cast iron (DIN1691/GG20) that does not create unwanted sounds and is capable of resisting the huge string tension of more than 20 tons without bending.
  • 14) Rim
    Made of 3mm beech veneer stripes, torsion-free bonding. The rim is the frame of a grand piano. It connects the instrument’s parts and gives it its shape.
  • 15) Keyboard
    Made of best fine spruce. The link between player and instrument that transmits all emotions and powers.
_DSF5952.jpg
Uprights gold.png
Construction Uprights
Anatomie-Piano_FLAT.png
  • 1) Frenator soft-close system
    Allows smooth automatic closing of the fallboard and therefore avoids damages or injuries by a fallboard dropping shut.
  • 2) Key-bed
    Made of massive spruce. Its three-layer construction provides long-lasting stability and thus a permanently precise functioning of the action.
  • 3) Tuning block
    Made of cross-glued, multi-layer beech wood. Provides high stability and strong support for the string tension, which leads to an especially good stability of the tuning.
  • 4) Action
    Made from around 6.000 wooden, metal, leather and felt parts. Designed state-of-the-art for professional exigencies.
  • 5) Soundboard support
    Made with glued-in ribs. Thanks to its design with a curve, a connection is created that offers the soundboard best resonance conditions.
  • 6) Membrator groove
    Optimises the acoustic properties of the soundboard and thus the transparent sound that is characteristic for Seiler.
  • 7) Soundboard
    Made from mountain spruce with especially fine grain. It is glued to the rim in a slight curve to obtain some tension and amplifies the vibrations of the strings.
  • 8) Ribs
    Made of spruce with standing growth rings. Each of these ribs has a specific form, which adds to the membrane effect of the soundboard.
  • 9) Back posts
    Made of massive spruce, wedge-glued. Strut the framework, the so-called rim, which serves as a stable support for the soundboard.
  • 10) Bridge
    Made from beech with a top layer of maple. Provides a tight fit of the bridge pins and a precise transmission of the strings’ vibrations to the soundboard.
  • 11) Outer rim
    Made of 2,4 mm mahogany veneer stripes. Does not only provide the instrument’s nice outward appearance, but also influences its sound.
  • 12) Tone Volume Stabiliser
    Creates a permanent longitudinal curve. Improves richness and projection of our sound, optimises and preserves the elasticity of the soundboard.
  • 13) Cast-iron frame
    Made of high-grade cast iron (DIN1691/GG20) that does not create unwanted sounds and is capable of resisting the huge string tension of more than 20 tons without bending.
  • 14) Rim
    Made of 3mm beech veneer stripes, torsion-free bonding. The rim is the frame of a grand piano. It connects the instrument’s parts and gives it its shape.
  • 15) Keyboard
    Made of best fine spruce. The link between player and instrument that transmits all emotions and powers.
bottom of page